Outlet & Switch Installation in Myrtle Beach, SC
One fixed price before the work starts, and a real person on the line around the clock.
How much does outlet or switch installation cost in Myrtle Beach, SC?
A standard outlet or switch replacement in Myrtle Beach runs $125 to $250; a GFCI or USB outlet runs $150 to $300 because the device itself costs more and takes a few extra minutes to wire correctly.
The device is a small part of that number. A GFCI outlet is $15 to $35 at the supply house. What you're paying for is a code-correct installation on a circuit that's been checked, not just a swap.
Why Not Every Outlet Should Just Be Swapped
Plenty of outlet and switch jobs really are a five-minute swap. The ones that aren't are the ones where the box has no ground wire, the circuit is shared in a way that current code doesn't allow, or a GFCI is going in on a circuit that was never grounded in the first place.
That last one still has a legal path. A GFCI can be installed on an ungrounded circuit if it's labeled 'No Equipment Ground,' which protects people even though it doesn't protect equipment the way a true ground does.
Dimmers have their own trap: an old dimmer paired with new LED bulbs is the single most common cause of flickering or buzzing dimmed lights, and no amount of bulb-swapping fixes a dimmer that isn't rated for LED loads.
What's Included
Signs You Need This
How Installation Works
Check the existing wiring
Is the box grounded? Is the circuit shared with something it shouldn't be? This determines what's actually possible, not just what's requested.
Time on site: 10–20 minutes
Confirm the device and price
You approve the exact device and price before installation, especially for GFCI, dimmer or USB devices with a wider price range.
Time on site: 5 minutes
Install and secure
New device wired, secured to the box, and covered. No exposed wiring left for a later problem.
Time on site: 15–30 minutes per device
Test under load
GFCI test/reset cycle, dimmer dim-range check, or a simple plug-in test depending on the device.
Time on site: 5 minutes
Where GFCI and AFCI Protection Is Required
Current code requires GFCI protection in kitchens, bathrooms, garages, outdoors, unfinished basements, crawl spaces, and anywhere within 6 feet of a sink. AFCI protection is required for most bedrooms, living areas, hallways and similar rooms. A permit generally isn't needed for a like-for-like swap, but it usually is for a new circuit.
Outlet & Switch Pricing in Myrtle Beach, SC
USD
- Standard outlet or switch replacement$125–$250per deviceLower end for a straightforward grounded-box swap.
- GFCI outlet installation$150–$300per outletHigher end when the circuit needs to be traced or the box updated.
- Dimmer switch installation$125–$225per switchIncludes matching the dimmer to your fixture's actual load.
- USB / USB-C outlet installation$150–$275per outletDevice cost is higher than a standard outlet; labor is similar.
- New dedicated circuit for an outlet$250–$600per circuitDepends on run length and whether the panel has open breaker space.
These are typical ranges for Grand Strand; your exact price is confirmed in writing before work starts.
A box with no ground wire sometimes needs a different approach. Your electrician will explain the legal, code-correct options on site.
Outlet & Switch Installation in Myrtle Beach, SC — questions
A GFCI outlet cuts power in a fraction of a second if it senses current leaking somewhere it shouldn't, like through a person. Current code requires them in kitchens, bathrooms, garages, outdoors and within 6 feet of any sink.
In most places, yes for a simple like-for-like swap with the power off, but a wrong wire order or a skipped ground check is exactly how outlet fires start, and GFCI and AFCI requirements trip up a lot of DIY jobs. If the box has no ground wire or the circuit is unfamiliar, that's the point to call someone.
Usually a ground fault somewhere downstream on that circuit: moisture in an outdoor box, a nicked wire, or a failing appliance, not a bad GFCI. Unplugging everything on that circuit and resetting is the fastest way to narrow it down before calling.
A standard outlet replacement runs $125 to $250 in Myrtle Beach; a GFCI outlet runs a bit higher at $150 to $300 because of the device cost and the extra wiring step.
Yes. USB and USB-C outlets install in place of a standard duplex outlet and cost $150 to $275 including the device. They're a popular add at nightstands, kitchen counters and home offices.
A regular switch is fully on or off; a dimmer varies the voltage to control brightness, but it has to be rated for the actual bulb type. An old dimmer with new LED bulbs is the most common cause of flickering.
Licensed, insured electrical repair, panel upgrades and installs for Myrtle Beach and Horry County.
- Licensed & insuredEvery job is performed by a licensed, insured electrician working to South Carolina electrical code.
- Fixed written pricingYou see the number before any tool touches your panel. The quote doesn't move once work starts.
- Permits handledThe permit gets pulled and the inspection gets scheduled as part of the job, not a form you're left to chase.
- 24/7 emergency lineSparking outlets, burning smells and total power loss get a same-day or overnight response.
Tell us what's going on and we'll call back with a real arrival window, not a vague callback promise.
Ready when you are.
Most outlet and switch jobs are same-day if you call before early afternoon. Get a fixed price before anything's installed.